Elcon Ultra High Frequency, Power Factor Controlled, IP67 Sealed and Potted, CAN Bus Controlled Battery Chargers
Click on picture to go to page:
Features:
o 250Kbps or 500Kbps CAN bus control on both 3rd & 4th gen
o Enable/disable control & lead acid charging is available on 3rd gen
o AC voltage, current and internal temperature info available on 4th gen
o Power factor controlled for highest efficiency
o UDS diagnostics with CAN wake-up functionality on 4th gen
o Fully sealed electronics, operating temperature range -40℃ to 60℃
o Temperature sensor reduces power at 85℃ and stops charging at 90℃
o IP67 protection level allows operation in harsh environments
o Operates automatically on both 115VAC and 230VAC, 50/60 Hz
o Three phase 380VAC 10KW and 20KW chargers are also available
Elcon UHF 3rd and 4th generation chargers:
- 3rd gen 1.8KW Chargers
- 3rd gen 3.3KW Chargers
- 3rd gen 6.6KW Low Voltage Chargers
- 3rd gen 6.6KW High Voltage Chargers
- 4th gen 3.3KW Low Voltage Chargers
- 4th gen 3.3KW High Voltage Chargers
- 4th gen 6.6KW Chargers
Elcon UHF RA10P0 & TR3730 series 10KW and TR3620 & TR3630 series 20KW 3-phase 380 VAC fan cooled and liquid cooled chargers:
Elcon UHF 4th generation charger specifications:
We also have 4th generation Elcon UHF 6.6KW HK-LF-500-14 fan cooled, CAN bus controlled chargers in stock with an output voltage range of 400-600V.
Elcon CAN 1000 (250Kbps) and CAN 1200 (500Kbps) Specification:
Elcon CAN Commands:
Elcon 4th generation CAN 3865 Specification:
- The optional CAN 3865 protocol available on 4th generation chargers provides AC Input Voltage, AC Input Current, and Charger Internal Temperature in the CAN status byte sent by the charger every second.
