Elcon UHF Chargers and DC-DC Converters

  • Advanced Ultra High Frequency switching design
  • 93% typical efficiency and Power Factor Correction
  • AC input range of 90-265V 50/60Hz for worldwide operation
  • Free custom programming to your exact requirements
  • Free technical support by email and discounted reprogramming
  • IP67 sealed and potted chargers for improved reliability in demanding environments
  • Power factor of more than 0.98 reduces utility surcharges and maximizes AC power utilization
  • One year repair or replacement warranty
  • Battery manufacturer approved charging algorithms
  • Charging curves for flooded, gel, AGM, Li Poly and LiFePO4 batteries
  • 3rd gen UHF chargers can charge lithium & lead acid batteries without using CAN bus
  • UHF IP67 sealed and potted 1.8KW, 3.3KW and 6.6KW chargers
  • CAN bus speed 250Kbps or 500Kbps, CAN IDs E5, E7, E8 or E9
  • 6.6KW chargers available in fan-cooled and liquid-cooled versions
  • UHF DC-DC converters available in 500W, 1000W and 1500W sizes
The following models are available:

Single phase 115VAC/230VAC CAN bus chargers:
1.8KW 48V, 72V, 96V (fan cooled)
3.3KW 48V, 72V, 108V, 144V, 312V, 540V (fan cooled)
6.6KW 108V, 144V, 312V, 540V, 600V (fan cooled & liquid cooled)

Three phase 380VAC CAN bus chargers (fan cooled and liquid cooled):
11KW 24V, 48V, 72V, 108V, 144V, 360V, 540V (specs available upon request)
22KW 24V, 48V, 72V, 108V, 144V, 360V, 540V (specs available upon request)

12V DC-DC converters with CAN bus control:
500W 48-72V, 80-90V air cooled, no CAN bus
1KW 72V, 108V, 144V, 320V air cooled
1.5KW 48V, 72V, 115V, 144V, 320V fan cooled
2KW 320V liquid cooled

Single phase 115VAC/230VAC CAN bus chargers with DC-DC converter (fan cooled and liquid cooled):
3.3KW+1KW DC-DC 72V, 108V, 144V, 312V
3.3KW+1.5KW DC-DC 144V, 312V
6.6KW+1.5KW DC-DC 144V, 312V
6.6KW+2KW DC-DC 144V, 312V

IP67 sealing and potting process: